Replacing the humidifier wick – Hunter Fan 32200 User Manual

Page 7

Advertising
background image

43001-01 04/27/2007

7

© 2007 Hunter Fan Co.

NoTE: The humidifier’s Wick is made of paper and is NoT washable.
over time, minerals in your water will build up in the humidifier’s Wick, degrading its ability to absorb

water and reducing the humidifier’s output. Therefore, you should replace the humidifier’s Wick every

4 - 8 weeks, depending on the hardness of your water.
1. Turn the humidifier ‘oFF’ and unplug the unit.

2. Lift the Main Housing, remove it from the Base, and set it aside.

3. Grasp the humidifier Wick, hold it over the base, and squeeze the water from it. This will keep

water from dripping onto your floor. You may also want to wrap the Wick in a towel to keep it

from dripping while you transport it to disposal.

4. Replace the old Wick with a new Hunter humidifier Wick, number 31911. New Wicks are available

at your local Hunter retailer or at www.hunterfan.com.

5. Ensure the Wick is properly seated, resting on the bottom of the base and not tilted or otherwise

out of position.

6. Return the Main Housing to its position on the Base. Make certain the Main Housing is properly

seated on the Base.

7. plug the humidifier’s power Cord into a standard household power outlet and turn the power/Speed

Control to your desired setting.

Replacing the Humidifier Wick

Advertising