HP 340 - Manual (Page 9)

7 7 7 7 7
You can print a directory listing to verify that your printer and
computer are communicating.
At the DOS prompt, type DIR>PRN and press Enter.
The printer prints a list of file names from your current directory.
When the printer has finished printing, you may have to press the
Paper Feed button to eject the page.
Instructions for Macintosh Users
If the Macintosh printer software and special Mac Adapter cable
have not been packaged with your HP DeskJet 340 printer, you will
need to purchase them from your dealer.
Make sure you have the minimum system requirements:
System 7.0.1 or above
68030 processor and above
4 MB RAM or above
7.5 MB of free hard disk space
To install your printer software:
•
Quit any open applications and turn off any virus protection
applications.
• Insert the Install disk into the disk drive of your Macintosh and
double-click its icon to open it.
• Double-click the Installer icon.
• Click the Install button to install the printer software on your
hard disk.
• Follow the instructions that appear on the screen to complete
the installation of the printer software.
Notes
Unless you have a built-in Ethernet connector in your Macintosh
and are using EtherTalk, make sure that the AppleTalk Inactive
button is checked in the Chooser dialog box.
If you do have a built-in Ethernet connector in your Macintosh and
are using EtherTalk, make sure that the AppleTalk Active button is
selected on the Chooser screen. If the Inactive button was
previously selected, you will need to restart the computer to make
the network active.
If you are using System 7.5 or a later version, see the “Basic
Printing Setup” topic of HP Printer Guide (available in the Guide
menu ).
Getting Started
US Eng 8/28/96, 1:20 PM 7