HP 340 - Manual (Page 6)

4 4 4 4 4
3 Push the paper release lever
down to the open position.
4 Slide the left paper width
adjustment guide to the side
of the sheet feeder.
5 Now insert paper in the sheet
feeder. Move the left paper
width adjustment guide against
the paper.
The guide clicks into position
for U.S. Letter, U.S. Legal, U.S.
Executive, or A4.
6 Finally, push the paper release
lever up to press the paper
against the rollers.
The paper is now ready for
printing.
Notes on loading paper
• Load paper with the side to print facing up.
• Use only one paper type at a time.
• The number of sheets that you should load depends on the
weight of the paper:
Paper Weight Number of Sheets
24 lb. (90 g/m 2 ) 20
20 lb (75 g/m 2 ) 25
16 lb (60 g/m 2 ) 30
Installing the Portable Sheet Feeder
To install the portable sheet
feeder:
1 Insert the two catches near
the bottom of the sheet feeder
into the corresponding slots
near the bottom of the printer
face.
2 Now rotate the top edge of the sheet
feeder toward the printer and press
the two units together.
You will hear a click as the sheet
feeder latches onto the printer.
3 Stand the printer upright on a firm surface, such as a desk or
table.
Loading Paper
To load paper in the portable sheet feeder:
1 Using the recess at the top center of the
sheet feeder, open the unit gently until
you hear a click.
2 Rotate each of the paper support arms
until both point upwards.
Getting Started
3
4
5
6
US Eng 8/28/96, 1:19 PM 4