HP 0706124 REV B - Manual (Page 59)

Variable Mode Printing 3-3
Print speed is increased by:
◆ Reducing the number of passes (see “Selecting a Print
Mode” on page 3-7)
◆ Reducing the number of different colors or using smaller ink
sets (four or six colors instead of eight or more)
◆ Printing with two heads per color (see “Selecting a Print
Mode” on page 3-7)
◆ Printing bidirectionally (in both directions); see “Selecting a
Print Mode” on page 3-7
◆ Printing in non-HQ mode (see “Selecting a Print Mode” on
page 3-7)
◆ Printing in low relative humidity to avoid drying delays
◆ Disabling the service station overspray delay under Config-
ure Printer - Printer Settings - SS Overspray Delay (see
page 2-13)