Fax setup – HP 2400 User Manual
Page 125
13
115
fa
x setup
fax setup
After completing all steps in the Setup Poster, use the instructions in this section
to complete your fax setup. Please keep your Setup Poster for later use.
In this section, you will learn how to set up your HP PSC so that faxing works
successfully with any equipment and services you might already have on the
same telephone line as your HP PSC.
This section contains the following topics:
•
how to tell if the instructions in this chapter apply to you
on page 115
•
how to choose the right fax setup for your office
on page 116
•
select your fax setup case from this table
on page 118
•
case A: separate fax line (no voice calls received)
on page 119
•
case B: faxing with a distinctive ring service on the same line
on page 119
•
case C: shared voice/fax line
on page 121
•
case D: fax line shared with PC modem (no voice calls received)
on
page 122
•
case E: shared voice/fax line with PC modem
on page 123
•
case F: shared voice/fax line with answering machine
on page 124
•
case G: shared voice/fax line with PC modem and answering machine
on
page 126
•
case H: shared voice/fax line with voicemail
on page 127
•
case I: shared voice/fax line with PC modem and voicemail
on page 128
•
faxing from a DSL line
on page 130
how to tell if the instructions in this chapter apply to you
The fax setup instructions in this chapter are intended for parallel-type telephone
systems, which are most common in the countries/regions listed in the following
table.
•
Check the table to see if you are located in one of the listed countries/
regions.
–
If your country/region is listed, use the instructions in this chapter to
complete your fax setup.
–
If your country/region does not appear in this list, you probably have
a serial-type telephone system and you should not use the connection
instructions in this chapter. In a serial-type telephone system, connect
all other telephone equipment (modems, phones, and answering