Havis-Shields Dodge Charger Spare Tire Bracket C-TTB-CHGR - Manual (Page 2)

C-TTB-CHGR_INST_9-07
Always !
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit.
Note: There are two different types of trim packages for the Dodge Charger:
1. Police package w/ rubber floor mat and full size spare tire.
2. Police package w/ carpeted fiberglass trim and donut size spare tire.
This will affect the modification of the trim in the trunk.
It is also recommended to remove the back seat for ease of installation. In most cases
this must be done anyway to route wiring.
Trunk with full size spare tire
Remove spare tire/jack hold down
bracket (15mm, 13mm, 18mm)
Remove and discard upper
trim in trunk.
Remove carpeted fiberglass trim
for bracket installation and trim
modification
Trunk with carpeted fiberglass
trim and donut size spare tire