HP Raining DataCorp. mvEnterprise - Manual (Page 12)

1.6 Installation Instructions
1. To log on, type:
root
This installation procedure must be performed while logged on as
root. Once installed, mvEnterprise may be initiated from any UNIX
login.
NOTE: Make sure root and all UNIX logins that have access to
mvEnterprise have the soft file size set to unlimited. Please refer
to Section 2.1
2. Insert the mvEnterprise Release 4.1 release tape in the appropriate
tape drive.
3. If this is a new installation, build the base mvEnterprise directory.
For example:
cd /
mkdir production
4. Change directories to the mvEnterprise directory.
cd /production
5. Load the UNIX tar section by entering the command:
tar -xvpf tape_device_name
where tape_device_name represents the tape drive from which
mvEnterprise is being loaded. For example:
/dev/rmt0.1
Using this command installs the following programs:
consumer Transaction Logger consumer program.
install mvEnterprise installation program.
logger Transaction Logger raw device
configuration.
perror Convert UNIX error numbers to text.
pick mvEnterprise monitor program.
picksync mvEnterprise disk flushing program.
pickoda mvEnterprise ODA monitor program.
Page 10 mvEnterprise Release 4.1 on AIX Installation Guide