HP Raining DataCorp. mvEnterprise - Manual (Page 59)

7. Select TYPE of file system, then press the List key to display the
existing file system types. Select the appropriate type and press
Enter.
8. Press the Enter key to mount the file system. The Command Status
screen displays, confirming the successful mounting of the file
system.
2.3.4 Create a Database to Store mvEnterprise Data
The config file is updated by the install program while it creates a
database on the file systems, which were set up above. During the
software installation, the install procedure prompts:
Enter initial data base names:
When done, type “end”.
In the above example, type /mvefs/mvelv00/DB where DB is a user
selected name. It is recommended that the -i option (to initialize the
database) be used with the install program. If multiple database files are
to be created on the same file system, a unique name is needed for each
of the DB files. In the example below, two database files are created:
0/mvefs/mvelv00/DB0
0/mvefs/mvelv02/DB1
end
mvEnterprise Release 4.1 on AIX Installation Guide Page 57