HP DL120 User Manual
Page 39
Advertising
Removal and replacement procedures 39
4.
Remove the HDD 2 drive carrier.
a.
Remove the screw that secures the HDD 2 carrier (1).
b.
Push the HDD 2 carrier towards the front of the chassis, and then slide it out completely (2).
c.
Remove four of the five mounting screws from the carrier.
5.
Remove the new hard drive from its protective packaging.
6.
Install the new hard drive module in its carrier.
a.
Align the hard drive module on the carrier (1).
b.
Secure the hard drive assembly with four mounting screws (2).
Advertising