HP DL120 - Manual (Page 82)

Diagnostic tools 82
5. Reboot the server.
The diagnostic screen is displayed briefly at the end of POST.
6. Press the Pause/Break key to continue displaying the screen until another key is pressed.
7. Press any key to continue with the system bootup.
Updating/recovering the system BIOS
An interruption during the BIOS upgrade/recovery process (e.g. a power outage) can corrupt the
BIOS code, which will cause the system to go into an unbootable state. Enabling the boot block
program lets users restart the system and recover the regular BIOS code.
Use the JP5 jumper to enable the boot block.
• 1 – 2: Normal operation (default)
• 2 – 3: Configure BIOS
• Removed: Access the boot block code