HONDA BF50D - Manual (Page 40)

38
Tiller Handle Height/Angle
Adjustment (LH type)
BEFORE OPERATION
HANDLE ANGLE: 13°
Reference point
HEIGHT
HEIGHT ADJUSTMENT
BLOCK
HANDLE ANGLE: 13°
HANDLE ANGLE: 21°
HANDLE ANGLE: 7°
Install the height adjustment block
so that the selected angle of the
tiller handle is in this position.
HANDLE ANGLE: 7°
HANDLE ANGLE:
21°
8 28 mm
FLANGE BOLT
10.8 in
(275 mm)
13.2 in
(336 mm)
15.7 in
(399 mm)
The tiller handle height and angle can
be adjusted to three positions by
changing the installation direction of
the height adjustment block. Select a
suitable height and angle for the
operator and secure the block.
Raise the tiller handle and remove
the 8
28 mm flange bolt and the
height adjustment block.
Pull down the tiller handle.
Determine the height adjustment
block installation direction and
secure the block with the 8
28
mm flange bolt.
2.
1.
08/02/28 10:40:50 31ZZ4600_039