HONDA BF50D - Manual (Page 94)

92
STORAGE PRECAUTIONS
HOISTING THE OUTBOARD
MOTOR Engine Oil
STORAGE
LIFTING
EYE
HOIST
HOOK
After the outboard motor is placed
in storage and disconnected from
the hoist, install the engine cover.
Select a well-ventilated storage area.
If possible, avoid storage areas with
high humidity.
Pour a tablespoon or teaspoon (p.
) (5 10 cm ) of clean
engine oil into each cylinder.
Disconnect the outboard motor
from the boat, hoist the outboard
motor, and move it to the storage
area.
Change the engine oil (p. ).
Remove the spark plugs (p. ),
and remove the emergency stop
switch clip from the emergency
stop switch.
Using the emergency starter rope
(p.
), rotate the flywheel a few
revolutions to distribute the oil in
the cylinders.
Reinstall the spark plugs (p. ).
Unlatch and remove the engine
cover (p.
).
Attach the hoist hook to the lifting
eye.
If storing a container of gasoline,
such as the portable fuel tank
(optional equipment), store it away
from any appliance that operates with
a flame, such as a furnace, water
heater, or clothes dryer. Also avoid
any area with a spark producing
electric motor, or where power tools
are operated.
2.
3.
4.
1.
2.
3.
1.
4.
5. 74
50
72
74
70
106 3
08/02/28 10:50:29 31ZZ4600_093