HONDA BF50D - Manual (Page 103)

10 A, 15 A, 30 A
101
Fuse Replacement
TAKING CARE OF UNEXPECTED PROBLEMS
FUSE PULLER
(supplied in the tool bag)
BLOWN FUSE
Main Fuse
Never use a f use with a rating
greater than specif ied. Serious
damage to the electrical system could
result. Disconnect the battery cable at the
battery negative (
) terminal bef ore
replacing the f use.
Failure to do so may cause a short
circuit.
Reconnect the battery.
If a blown fuse is found, try to
determine and correct the electrical
problem that caused the blown fuse.
An uncorrected electrical problem
may cause the fuse to blow again.
If fuses continue to blow, take the
outboard motor to an authorized
Honda Marine dealer for inspection
and service, or refer to the shop
manual. Use the fuse puller from the tool
kit to remove the fuses. If a fuse is
blown, install a replacement fuse
of the same specified rating. The
outboard motor is supplied with
spare fuses in the fuse holder.
MAIN FUSE RATINGS:
Stop the engine and disconnect the
battery cable.
Remove the electrical parts cover.
Remove the fuse case lid.
Reinstall the fuse case lid, and the
engine cover.
1.
2.
3.
4.
5.
6.
08/02/28 10:52:23 31ZZ4600_102