Operating instructions input switching, Size switching – Hitachi 42EDT41 User Manual

Page 33

Advertising
background image

OPERATING INSTRUCTIONS

Input Switching

INPUT SELECT button

RGB/VIDEO
buttons

Each time the ZOOM button of the remote control is
pressed, the screen display size will change in sequence
and the status will be displayed at the bottom of the
screen.

Full

Size Switching

• During VIDEO signal input (AV1, AV2, AV3, AV4, RGB1

(set to [DVI-STB]) and RGB2 (set to [Component]))

• The size will fix as Full mode and not change when receiving the

component signal of 1080i/50, 1080i/60 or 720p/60.

4:3 Panoramic Zoom

Full Cinema

Display size selection diagram

When you want to

Set the display size

Input signal

Display screen

Remarks

Play a 4:3 image in a 16:9 screen faithfully.

4 3

Blanking occurs on both sides.

Play a 4:3 image in a 16:9 screen with the
height and width of the middle of the
screen enlarged on equal scales and with
both sides appearing somewhat enlarged.

Panoramic

Play a 16:9 VISTA size image in the 4:3
image faithfully reproduced on the 16:9
screen.

Zoom

• The 4:3 image is called a letterbox

image.

• In some cases, some slight blanking may

remain at the top and bottom.

Play a 21:9 Cinema size image in the 4:3
image expanded vertically on the 16:9
screen.

Cinema

In some cases, some slight blanking may
remain at the top and bottom.

Play a 4:3 image faithfully in a 16:9 screen
in the standard vertical size and
horizontally squeezed.*

Full

* An image with an aspect ratio of 16:9

shrunk horizontally to 4:3 to display in a
4:3 screen

(4:3 signal)

(Squeeze)

(Vista)

(Cinema)

ZOOM button

Input can be switched by pressing the AV1, AV2, AV3,
AV4, RGB1 or RGB2 buttons of the remote control. And
the way to return to a TV channel is as follows:

• Pressing INPUT SELECT button at RGB2 input screen.
• Pressing some PROGRAM SELECT buttons and select a TV

channel.

• Pressing PROGRAM UP/DOWN buttons at the screen without

OSD(On-screen display).

Input can be switched in the sequence of TV

AV1

AV2

AV3

AV4

RGB1

RGB2 by pressing the

INPUT SELECT button of the monitor or the remote
control.

TV AV1 AV2 AV3

RGB2 RGB1 AV4

Advertising