Connecting and disconnecting ipod – HP iPod User Manual
Page 22
18
Using iPod
Connecting and Disconnecting iPod
You connect iPod to your PC to transfer and manage music, and, in most cases, to
charge the battery.
To connect iPod to your PC:
Connect iPod to your PC using the iPod Dock Connector to USB 2.0 Cable. Be
sure the connectors on both ends of the cable are oriented correctly. They can
only be inserted one way.
Note: If you have a PC with a 6-pin FireWire 400 port, you can use the iPod
Dock Connector to FireWire Cable.
Note: USB 1.1 is not supported.
Or, if you have an iPod Dock (see page 21), connect the appropriate cable to a
FireWire or high-power USB 2.0 port on your PC and connect the other end to
the Dock. Then put iPod in the Dock.
By default, iPod imports songs automatically when you connect it to your PC.
When this automatic transfer is done, you can disconnect iPod.
034-2616-A.book Page 18 Thursday, July 8, 2004 12:36 PM