Harrison Labs MIXBUS V2.0.2 User Manual
Page 19
Mixbus Knobs and Faders:
• When a knob is in the “default” position, the indicator is very dim. This allows you to scan the mixer for set-
tings that are not at default.
• Mixer strip knobs can be double-clicked to instantly return them to their default value.
• Holding Ctrl/Cmd while turning the knob provides a fine-adjust mode, while Shift+Ctrl/Cmd allows super fine
adjustments.
• Mixbus knobs and sliders incorporate an “in-on-change” feature. When any knob or fader is clicked and
changed, it will automatically enable the control by also setting the “in” or “on” control for that section.
Default Signal Routing:
When you make new tracks, they are automatically assigned to the master channel to allow the signal to be moni-
tored quickly.
Floating-Point processing:
Mixbus uses a floating-point internal architecture, it is possible to exceed 0 dBFS on the channel and mix bus strip
meters without ill effects. For this reason there is no colored indication of overly-loud signals on input and mix bus
strips.
Unlike the channel and mix bus strip meters, which can exceed 0dBFS safely, the master output meter will turn yel-
low when the peak signal approaches -2 dBFS. This is an indication that the signal may be affected by the built-in
limiter.
Master Bus Volume:
Normally you will use the volume knob provided by your computer or I/O device to control the loudness of your
speakers. If you are using the fader of the Master strip to control speaker volume, remember to set the fader to the
correct level before you export your project to a .wav file, since the master fader level is applied to the export. Use
the K-14 meter to verify that the export volume is at a reasonable level.
Right-click:
Mixbus uses the right mouse button for many, many features. Try right-clicking on tracks, regions, mute buttons,
solo buttons, group panes, regions, selected ranges, markers, mixer redirects, clocks, the region list, and the marker
bar area. Each will launch a context menu that provides useful features.
"If you asked a hundred engineers, mixers and producers to define the "perfect console" you would proba-
bly get a hundred answers. The answers, however, would all contain the same salient points.
The "perfect console" would have totally transparent sound, capturing the true musical quality of all per-
formances. It would have unlimited features, facilities, and functions. It would perform all required tasks
with a minimum of operator effort. It would be totally reliable and require no preventive or corrective mainte-
nance...
You can spend the rest of your life looking for the "perfect console". You'll never find it. You will find, how-
ever, that we have what you need." - Harrison MR20 brochure, circa 1982
1
11
1..0
0 M
Miix
xe
er
r C
Co
on
nv
ve
en
nt
tiio
on
ns
s &
& T
Tiip
ps
s
19
Section 11.0 - Conventions & Tips
Mixbus User Guide