Harrison Labs MIXBUS V2.0.2 - Manual (Page 57)

Create marker on Xrun
If this option is ON then Mixbus will put a "marker" at each xrun encountered during a recording. This is useful when
making a long-form recording. The user can examine the xruns after the fact and try to fix and/or hide them.
Stop Transport at Session End
If this option is ON then the transport will automatically stop when it hits the session End marker. Note that this does
not affect recording. When recording the End marker will be pushed farther out.
-12dB gain reduce during ffwd/rewd
If this option is ON then Mixbus will reduce the master output level during varispeed playback that is more than 2x
speed in forward or backwards direction.
Primary/Secondary Clock Delta to Edit Cursor
Selecting this option will make the Primary/Secondary clock show the Delta (difference / distance) between the edit
cursors (see "implicit ranges”).
Always Copy Imported Files
If this is selected then a drag/drop operation will always result in the file being imported (with any needed SRC or bit-
depth change). If this is off then drag/drop files will be used in-place.
Link Region/Track Selection
If enabled selecting a region will also select the track where the region is located. However, this will disable any
other tracks that were selected for editing.
Name New Markers
By default markers are created with a number and may be renamed manually later. If enabled new markers will be
immediately prompted for a new name.
Rubberbanding Snaps to Grid
Rubberband-selecting will auto-snap to the nearest grid.
Auto-Analyze New Audio
If this is checked any imported or recorded audio will be analyzed so that the region can be navigated using jump-to-
transient operations. If this is not checked then the user will be prompted to analyze a file whenever jump-to-tran-
sient is used.
2 27 7..0 0 O Op pt tiio on ns s M Me en nu u
57 Section 27.0 - Mixbus Options Mixbus User Guide