HONDA BFP8D - Manual (Page 49)

47
R Type
(remote control)
OPERATION
SWITCH CLIP LANYARD
N (neutral)
CONTROL
LEVER
Side-Mount Type
For panel mount or top mount remote
control information, refer to the
instructions provided with the remote
control equipment.
Put the emergency stop switch clip
in the emergency stop switch, and
attach the lanyard to your PFD
(Personal Flotation Device) or to
your wrist, as shown.
Set the control lever in the N
(neutral) position.
The engine will not start if the F
(forward) or R (reverse) gears are
engaged.
The emergency stop switch clip
and lanyard system is a safety
device that will stop the engine if
you fall away from the controls
while operating the boat.
Always attach the lanyard to your
PFD, or to your wrist, before
starting the engine.
The engine will not start or run,
unless the switch clip is in the
emergency stop switch.
1.
2.
04/03/15 10:29:51 31ZY0600_048