HONDA BFP8D - Manual (Page 84)

82
Portable Fuel Tank and Filter
Cleaning
SERVICING YOUR OUTBOARD MOTOR
ARROW
(Fuel Flow Direction)
TANK FILTER JOINT
(Fuel Hose Connector)
O-RING
FILTER
Fuel Tank
Fuel Tank Filter
Install the new filter on the fuel
hoses, with the fuel flow arrow
pointing toward the fuel pump as
shown. Fuel flow will be impeded
if the filter is installed backward.
Install and lock the engine cover.
Empty the portable fuel tank into an
approved gasoline container. Use a
funnel to avoid spilling fuel. Rinse
the fuel tank with nonflammable
solvent to remove any accumulated
sediment.
Unscrew the fuel hose connector
by turning it counterclockwise,
then remove the fuel hose
connector and fuel filter from the
tank.
Clean the filter in nonflammable
solvent. Inspect the fuel tank filter
and the connector O-ring. Replace
them if damaged.
Reinstall the filter and hose
connector in the fuel tank. Tighten
the hose connector securely.
Remove the fuel hose clamps, and
connect the fuel hose to the
outboard motor. Check for leaks.
5.
6.
7.
1.
2.
3.
04/03/15 10:36:13 31ZY0600_083