Assembly step 1 – Horizon Fitness ELITE 4.2E User Manual
Page 4
![background image](/manuals/93369/4/background.png)
BEFORE
YOU
BEGIN
6
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
7
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 1
A) Open
HARDWARE BAG FOR STEP 1.
B) Slide
TOP CAP over bottom of
CONSOLE MAST.
C) Carefully pull the
CONSOLE WIRES
through the
CONSOLE MAST using
the twist tie located inside the
CONSOLE MAST.
D) Attach the
CONSOLE MAST to the
MAIN FRAME using 6 BOLTS (A), 6
SPRING WASHERS (B) and 6 FLAT
WASHERS (C).
��������
�����
������
������
����������
�����
������
����
����������
�����
������
���������
����
������
���������
HARDWARE BAG FOR STEP 1 CONTENTS :
��������������
��������������
c
����������������
c
����������������
c
���������������������
c
�������������������
c
����������������
c
���������
c
��������������
c
�����������������������
c
������������������
c
������������������
c
������������������������������������
c
�����������������������������������
c
���������������������������
c
���������������������
c
����������������������
��������������������
���������������������
����������
���
������������
����������������������
��������������
�����������������
�������������������������
��������������������
���������������
���������������
����������
���������
���������������
���������������������
�������������
c
������������
c
������������������
c
�����������������
c
������������������������
c
���������������
c
��������������
c
����������������������
c
����������������������
�������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������
������������
3.2E
A) Open
HARDWARE BAG FOR STEP 1.
B) Slide
CONSOLE MAST GROMMET over
bottom of
CONSOLE MAST.
C) Carefully pull the
CONSOLE WIRES
through the
CONSOLE MAST using the
twist tie located inside the
CONSOLE
MAST.
D) Attach the
CONSOLE MAST to the MAIN
FRAME using 6 BOLTS (A), 6 SPRING
WASHERS (B) and 6 FLAT WASHERS
(C).
E) Insert the left
TOP SIDE COVER,
followed by the right
TOP SIDE COVER
and snap them together.
F) Insert
CUP HOLDER and secure it
using
SCREW (D) as shown.
G) Slide
CONSOLE MAST GROMMET down
to seal the console mast hole.
4.2E
������������
������������
������������������
��������
�����������������
���������������
�������������
3.2E. Steps A-D
������������
�������
������������
��������
������
����
�������������
��������
�����������������
���������������
�������������
����������
���������
4.2E. Steps A-G
Elite 3.2E 4.2E Elliptical Rev 1.0.indd 6-7
7/13/05 2:47:46 PM