HONDA Harmony HRB216TXA - Manual (Page 44)

SERVICING YOUR HONDA LAWN MOWER
42
Drive Clutch Cable Adjustment
TXA (gear transmission)
1. Measure free play at the top of the lever, as shown. Free play
should be 1/16 ~ 3/16 in (1 ~ 5 mm). If adjustment is necessary:
2. Loosen the lock nuts with a 10 mm wrench, and move the adjuster
up or down as required.
3. Tighten the lock nuts and recheck free play.
4. Start the engine outdoors, and operate the drive clutch lever.
Check that the drive clutch engages and releases properly.
If the drive clutch does not operate as it should, with correct cable
adjustment, take the mower to an authorized Honda servicing
dealer for repair.
1/16 ~ 3/16 in
(1 ~ 5 mm)
DRIVE CLUTCH LEVER
LOCK
NUTS
ADJUSTER
HRB216 TXA HXA.book Page 42 Monday, March 26, 2001 1:06 PM