HONDA Harmony HRB216TXA - Manual (Page 50)

STORAGE
48
3. With the mower in an upright position, start the engine outdoors,
and let it run until it reaches normal operating temperature to
evaporate any water remaining on the engine.
4. Stop the engine and allow it to cool.
5. After the lawn mower is clean and dry, touch up any damaged
paint (touch-up paint part numbers are on page 65), and coat other
areas that may rust with a light film of oil. Lubricate the control
cable cores with a silicone spray lubricant (page 65).
HRB216 TXA HXA.book Page 48 Monday, March 26, 2001 1:06 PM