Hitachi CP-RX80 - Manual (Page 35)

35
SETUP menu
Item Description
STANDBY MODE
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL SAVING
When SAVING is selected, the power consumption in the standby
mode is lowered with some functional restriction as below:
• When SAVING is selected, AUDIO OUT STANDBY setting of
AUDIO SOURCE (
36) is invalid, and no signal is output from
AUDIO OUT port in the standby mode.
MONITOR OUT
The combination of a picture shown on screen and output from the
MONITOR OUT port can be arranged in the menu.
(1) Choose a picture input port using ▲/▼ buttons.
• Choose STANDBY, to select the output
signal from the MONITOR OUT port in the standby mode.
STANDBY settings can be selected individually for NORMAL or
SAVING, which is selected in the STANDBY MODE (
above).
(2) Select the output signal from the MONITOR OUT port using
◄/► buttons.
COMPUTER IN OFF
• OFF disables the MONITOR OUT port.
• Initial settings for STANDBY are the following: COMPUTER IN
when NORMAL is selected in STANDBY MODE; and OFF when
SAVING is selected in STANDBY MODE.
COMPUTER IN S-VIDEO
STANDBY
VIDEO