Hitachi CP-RX80 - Manual (Page 36)

36
Item Description
VOLUME
Using the ◄/► buttons adjusts the volume.
High Low
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
The combination of a picture and audio input port can be arranged
in the menu.
The audio coming into the port selected in the (2) is output while an
image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using the ▲/▼ buttons.
• Choose AUDIO OUT STANDBY, to
select the audio output to the AUDIO OUT port in the standby
mode. The built-in speaker does not work in the standby mode.
• While RETURN is selected, pressing the ◄ button returns to the
previous menu.
(2) Select the output signal from the AUDIO OUT port using ◄/►
buttons.
AUDIO IN
• disables the audio output.
• C.C. (Closed Caption) is automatically activated when is selected
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for VIDEO or S-VIDEO,
or 480i@60 for COMPUTER IN and when AUTO is selected for
DISPLAY in the C.C. menu under the SCREEN menu (
41).
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor button
or the ENTER button to execute the item. Then
perform it according to the following table.
COMPUTER IN S-VIDEO
AUDIO OUT STANDBY VIDEO