HP RP3440 - Manual (Page 57)

Accessing a Pedestal-Mounted Server
NOTE: If you are replacing a hot-swappable item, you can leave the server on and leave the
external cables (including the power cord) connected.
Removing the Side Cover on a Pedestal-Mounted Server
To remove the side cover, follow these steps:
1. Power off the server and disconnect the power and external cables.
2. Remove the side cover.
a.
Grasp both indentations at the top of the side panel and pull outward.
b. Lift the side cover off of the server chassis.
Figure 3-11 Removing the Side Cover on a Pedestal-Mounted Server
Removing the Top Cover on Pedestal-Mounted Server
To remove the top cover, follow these steps:
1. Turn the top cover lock keyswitch to the unlocked position.
2. Rotate the blue release handle to release the latch.
3. Slide the cover toward the back of the chassis and lift the cover off.
Installing Additional Components 57