HONDA 2009 Accord Coupe User Manual

Page 168

Advertising
background image

If you are

traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.

Push the interface selector down to
scroll down the screen, highlight
A.SEL, then press ENTER on the
interface selector. You will see
A.SEL on the screen, and the system
goes into scan mode for several
seconds.

Use the tune, skip (seek), scan, or
RDS function to tune the radio to a
desired station.

Press the preset button, and hold
it until you hear a beep. You can
also store frequencies with the
interface dial. Select the preset
icon you want to store the
frequency on, then press ENTER
on the interface selector, and hold
it for more than 2 seconds.

Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.

The system will scan for a station
with a strong signal. When it finds
one, it will stop and play that station
for about 10 seconds. If you do
nothing, the system will then scan
for the next strong station and play it
for 10 seconds. When it plays a
station that you want to listen to,
press the scan side of the bar again,
or push the interface selector to the
right again.

Each preset button or

preset icon can store one frequency
on AM and two frequencies on FM.

Select the desired band, AM or
FM. FM1 and FM2 let you store
two sets of FM frequencies with
the preset buttons (on-screen
icons).

2.

3.

4.

1.

To store a preset memory location:

CONTINUED

Playing the FM/AM Radio (Models with navigation system)

AUTO SELECT

Preset

Fe
a

tu

re

s

165

A.SEL INDICATOR

PRESET ICON

A.SEL ICON

2009 Accord Coupe

Table Of Contents

Main Menu

Advertising
This manual is related to the following products: