HONDA 2009 Accord Coupe - Manual (Page 228)

CONTINUED
Press and release the Talk button.
After the beep, say the four-digit
code you want to use. For example,
say ‘‘1, 2, 3, 4.’’ The HFL response
is, ‘‘1, 2, 3, 4. Is this correct?’’
Press and release the Talk button.
After the beep, say ‘‘Yes.’’ The
HFL response is ‘‘HFL is now
searching for a Bluetooth phone.
Make sure the phone you are
trying to pair is in discovery mode.’’
Steps 5 and 6 show a
common way to get your phone into
its Discovery mode. If these steps do
not work on your phone, refer to the
phone’s operating manual.
When asked by the phone, enter
the four-digit code from step 3 into
your phone. The HFL response is
‘‘A new phone has been found.
What would you like to name this
phone?’’
Press and release the Talk button.
After the beep, say the name you
want to use. For example, say
‘‘Eric’s phone.’’ The HFL response
is ‘‘Eric’s phone has been
successfully paired. Returning to
the main menu.’’
If you want to pair another phone,
repeat steps 1 through 7.
Follow the prompts on your phone
to get it into its Discovery mode.
The phone will search for the HFL.
When it comes up, select
HandsFreeLink from the list of
options displayed on your phone.
Press and release the Talk button.
After the beep, say ‘‘Phone setup.’’
The HFL response is ‘‘Phone
setup options are status, pair, edit,
delete, and list.’’
Press and release the Talk button.
After the beep, say ‘‘Edit.’’ The
HFL response is ‘‘Which phone
would you like to edit?’’
Press and release the Talk button.
After the beep, say the name of
the phone you want to rename.
For example, say ‘‘Eric’s phone.’’
The HFL response is ‘‘What is the
new name for Eric’s phone?’’
3.
4.
3.
5.
6.
7.
8.
1.
2.
To rename a paired phone, do this:
Bluetooth HandsFreeLink
Fe
a
tu
re
s
225
NOTE:
2009 Accord Coupe
Table Of Contents Main Menu