HP R818 - Manual (Page 19)

19 Getting Started
10. Install the Software
The HP Image Zone software allows you to transfer images
to a computer and configure the HP Instant Share Menu on
the camera.
If you do not install the HP Image Zone software, you can still
use the camera but certain features will be affected. For
details, see Using Your Camera without Installing the
HP Image Zone Software on page 130.
If you have trouble installing or using the HP Image Zone
software, see the HP Customer Support website:
www.hp.com/support for more information.
Windows®
To install the HP Image Zone software, your computer must
have a minimum of 64MB of RAM, Windows 2000, XP, 98,
98 SE, or Me, and Internet Explorer 5.5 Service Pack 2 or
higher. Internet Explorer 6 is recommended. If your computer
meets these requirements, the installation process installs the
full version of HP Image Zone; if not, the process installs
HP Image Zone Express (see page 127).
1. Close all programs and temporarily disable any virus
protection software running on your computer so that
HP Image Zone will install more quickly.
2. Insert the HP Image Zone software CD into the CD drive
of your computer and follow the on-screen instructions. If
the installation screen does not appear, click Start, click
Run, type D:\Setup.exe, where D is the letter of your CD
drive, then click OK.
3. When the HP Image Zone software has finished
installing, re-enable any virus protection software you
disabled in Step 1.