Horizon Fitness LS 625E - Manual (Page 12)

BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 5
A) Open HARDWARE BAG FOR STEP 5.
B) Slide SPACER (I) into LOWER HANDLEBAR.
C) Place TEFLON WASHERS (E) on either side of SPACER (I). While holding TEFLON WASHERS (E) slide LOWER
LINK ARM into bottom end of LOWER HANDLEBAR.
D) Insert BOLT (H) into LOWER HANDLEBAR and secure using NUT (J).
E) Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (F).
F) Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER.
Note the position of the snap tabs before snapping into position.
G) Repeat on other side.
START / S TOP MODE
P1 MANUA L P5 RAMP P3 VALLE Y P4 FAT B URN P7 RAND OM P8 TARGE T HR
P R O G R A M S
ENTER
LOWER HANDLEBAR
LOWER LINK ARM
INSIDE
ELBOW COVER
OUTSIDE
ELBOW COVER
SCREW (F)
GUIDE RAIL
TEFLON WASHERS (E)
LOWER HANDLEBAR
NUT (J) BOLT (H)
LOWER LINK ARM
SPACER (I)
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR