Horizon Fitness LS 625E - Manual (Page 13)

BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
IMPORT
ANT
PRECAUTIONS
ASSEMBLY STEP 6
NOTE: There is NO hardware bag for this step.
All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the
CONSOLE wires .
B) Carefully tuck the CONSOLE MAST wires
into the CONSOLE MAST before attaching
the CONSOLE.
C) Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from the
console first).
DO NOT PINCH WIRES!
YOU’RE FINISHED!
NUT (J)
INSIDE DIAMETER:
8 mm
Qty: 2
BOLT (H)
60 mm
Qty: 2 SPACER (I)
44 mm
Qty: 2
TEFLON WASHER (E)
24 mm
Qty: 4
SCREW (F)
Qty: 2
HARDWARE BAG FOR STEP 5 CONTENTS :
START / S TOP MODE
P R O G R A M S
ENTER
CONSOLE
CONSOLE MAST
CONSOLE WIRES
PRE-ATTACHED
SCREWS
ASSEMBLY STEP 5
(CONTINUED)