Horizon Fitness HZ SERIES E95 - Manual (Page 8)


1&%"-
"3.
$3"/,
"3.
/65
%
8"4)&3
&
/05&
XBTIFS
PO
UPQ
TIPVME

CF
GBDJOH
CMBDL
TJEF
EPXO
/05&
XBTIFS
PO
CPUUPN

TIPVME
CF
GBDJOH
CMBDL
TJEF
VQ
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 
A) Open HARDWARE BAG FOR STEP 4.
B) Attach the PEDAL ARM to the CRANK ARM using 1 NUT (D) and 2 WASHERS (E).
C) Repeat on other side.
/:-0/
/65
%

NN
2UZ

8"4)&3
&

NN


NN
JOTJEF
EJBNFUFS
2UZ

HARDWARE BAG FOR STEP  CONTENTS :
ASSEMBLY STEP 
A) Open HARDWARE BAG FOR STEP 3.
B) Slide the CONSOLE MAST BOOT over the
bottom of the CONSOLE MAST.
C) Carefully pull console wires through the
CONSOLE MAST. Attach the console wires
to the pre-attached routing wire. Discard
wire when finished.
D) Attach CONSOLE MAST using 3 LOCK
WASHERS (C) and 3 BOLTS (B).
E) Slide CONSOLE MAST BOOT down to cover
exposed bolts.
#0-54
#
-0$,
8"4)&34
$
$0/40-&
."45
#005 $0/40-&
."45
."*/
'3".&
#0-5
#

NN
2UZ

-0$,
8"4)&3
$
2UZ

HARDWARE BAG FOR STEP  CONTENTS :