Entering a destination, 2010 odyssey – HONDA 2010 Odyssey Navigation User Manual
Page 41
Navigation System
41
Once you select an address, the system
then displays the
Calculate route to
screen (see Driving to Your Destination
on page
Showing the Map of City
With the
City
selection, the display
changes to the
Enter city name
screen.
When you have entered the desired city,
the display changes to a map. The
starting location will be the central
position in the selected city.
See Showing the Map of Current
Position on page
for instructions on
finding and entering your desired
destination.
Showing the Map of State
With the
State
selection, the display
changes to the
Enter state name
screen.
After you select the desired state, the
display changes to a map of the state,
with the crosshairs located near the
middle.
The yellow box indicates the area you
will see when you click on the current
map with the joystick. The scale will
decrease each time you push in on the
joystick, until
Select a destination
appears at the top of the screen.
Use the joystick to move the crosshairs
to the area of the state close to your
intended destination. If desired, use the
ZOOM
buttons to change the map scale.
When you have the crosshairs in the
desired area, push in on the joystick.
The address of the location you have
selected will appear at the top of the
screen.
NOTE:
The selected icon or road segment is
displayed on the 1/2 mile (800 meter) or
less map scale.
Entering a Destination
2010 Odyssey