HP R717 - Manual (Page 79)

79 Taking Pictures and Recording Video Clips
AE Bracketing
This setting allows you to take three pictures with the camera,
with each picture set to a different exposure value. When
you select one of the AE (automatic exposure) Bracketing
settings, the camera will take the first picture at normal
exposure (0 exposure value), followed by an underexposed
picture at the negative (-) exposure value in the setting, and
finally an overexposed picture at the positive (+) exposure
value in the setting. The entire sequence of three shots is
taken with only one press of the Shutter button. Use AE
Bracketing when you want to try underexposing and
overexposing a shot to get an image at the best exposure.
1. In the Capture Menu (page 61),
select AE Bracketing.
2. In the AE Bracketing sub-menu,
use the buttons to highlight
a setting.
3. Press the button to save the
setting and return to the Capture
Menu.
4. To take the three pictures, each at a different exposure
setting, simply press the Shutter button all the way down
one time. The entire 3–shot sequence is taken with one
press of the Shutter button.
Be sure to hold the camera still until all three pictures have
been taken. After the three pictures have been taken, each
image appears one at a time on the Image Display.