Preparation, Troubleshooting – haier HRF-356 User Manual

Page 8

Advertising
background image

Unpacking

Check attached accessories and
materials.

Ensure that the refrigerator is properly
located.

Clean the refrigerator before using.

Time lapse before power supply

Remove all packing materials.

Connect the refrigerator to power source at
least 30 minutes after the refrigerator is
sited and cleaned.

Check if all accessories specified in the
Packing List are available. Contact the
local distributor if shortage is found.

(See section Location )

(See section Cleaning )

Caution: After unpacking, write down the model and manufacture
number of the refrigerator on the Warranty Certificate which will be
required if technical services are applied for.

Preparation

Operation
Manual

Warranty

Certificate

Quality

Certificate

Л

Л

Troubleshooting

A slight sound may be heard when the
appliance is first started. The sound
will be lower and lower gradually a
short period later.

Temperature of the refrigerator and the
compressor will rise and the
compressor will run for comparatively
longer periods when the refrigerator is
first started.

The fan of an operating refrigerator
may produce a slight sound.

The compressor will operate for
comparatively longer periods if
excessive quantity of food is stored or
the ambient temperature is high.

Water droplets may occur on outer
surfaces and middle connection of the
refrigerator due to heavy moisture in
room air. Wipe clean with soft cloth.

The two sides of the external surface,
bottom and the middle connection of
the refrigerator will be warm due to
heat radiation of the appliance.

Hum

Hum

Whir

Whir

Advertising