Hoover Z 400 - Manual (Page 25)

6. Replace filter into dust cup with
flat side toward latch. Press into
place. 7. Reassemble cleaner by hooking
projection on bottom of motor/
handle section into opening on
bottom of dust cup.
8. Pivot sections together, making
sure latch is locked into position.
Reusable filter
How to clean filter
Disconnect cleaner from electri-
cal outlet.
The filter protects the motor from dirt particles. Brush dirt from filter
when emptying dust cup. If a significant reduction in pick-up is observed,
the filter may be washed in warm water. Filter must be completely dry
before replacing it in cleaner. Under normal operating conditions, a new
filter may never be needed if care is taken not to pick up oily debris or
sharp
objects.
24
, .