HP 410 - Manual (Page 10)

hp digital copier printer 410
chapter 3
6
load originals in the automatic document feeder
Your HP Digital Copier Printer has an automatic document feeder (ADF), which
you can use to load up to 35 originals of the following paper types:
• Plain Paper
16 lb (60 gsm) to 24 lb (90 gsm) long-grain paper only
• Specialty Paper
–
HP Premium Inkjet Paper
– HP Bright White Inkjet Paper
copy from the ADF:
1 Place all originals in the ADF print side up.
2 Adjust the paper-width guide to fit the size of your original.
A message appears on the display indicating that the originals are
loaded.
load paper
Following is the basic procedure for loading blank paper. There are specific
considerations for loading certain types of paper and transparency film. After
you review this procedure, see tips for loading other types of paper on page 9.
For best results, adjust the paper settings each time you change paper types or
paper sizes. For more information, see set the paper type on page 9.
load the paper tray:
1 Remove (pull out) the output tray and slide the paper-width and paper-
length guides to their outermost positions.