HP 2300dn - Manual (Page 149)

ENWW Paper Handling menu 147
TRAY 2 TYPE ANY TYPE
PLAIN
PREPRINTED
*LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK>164 G/M2
ROUGH Sets the value to correspond with the paper type
currently loaded in tray 2.
TRAY 3 SIZE *ANY SIZE
LETTER
A4 Sets the value to correspond with the paper size
currently loaded in tray 3.
TRAY 3 TYPE *ANY TYPE
PLAIN
PREPRINTED
LETTERHEAD
TRANSPARENCY
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK>164 G/M2
ROUGH Sets the value to correspond with the paper type
currently loaded in tray 3.
TRAY [N] CUSTOM There is no value to
select. This item appears only if a tray is set to a custom size.
UNIT OF MEASURE INCHES
*MILLIMETERS Selects the unit of measure to use when you set custom
paper sizes for the specified tray.
X DIMENSION 3.0 to 8.50 INCHES
76 to 216 MM
Sets the measurement of the width of the paper
(measurement from side to side in the tray).
Y DIMENSION 5.0 to 14.00 INCHES
127 to 356 MM
Sets the measurement of the length of the paper
(measurement from front to back in the tray).
After the Y DIMENSION value is selected, a summary
screen appears. This screen contains feedback that
summarizes all the information entered on the previous
three screens, such as
TRAY 1 SIZE= 8.50 x 14
INCHES , Setting saved .
Item Values Explanation