Print quality submenu, Print – HP 2300dn User Manual
Page 153
ENWW
Configure Device menu 151
Print Quality submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer-driver settings override control panel settings. For more
information, see
“Using the printer driver” on page 47
. In general, it is best to change these
settings in the printer driver, if applicable.
The following table lists the settings and possible values. In the Values column, the default value
for each setting is the one with an asterisk (*) next to it.
Item
Values
Explanation
SET REGISTRATION
There is no value
to select.
Shifts the margin alignment to center the image on the
page from top to bottom, and left to right. You can also
align the image that is printed on the front with the
image that is printed on the back.
PRINT TEST PAGE
There is no value
to select.
Prints a test page to show the current registration
settings.
SOURCE
ALL TRAYS
TRAY 1
*TRAY 2
TRAY 3
Selects the tray for which you want to print the test
page.
ADJUST TRAY [N]
X1 Shift
X2 Shift
Y Shift
-20
to
20
(*
0
)
Sets the registration for the specified tray, where [
N
] is
the number of the tray. A selection appears for each
tray that is installed, and registration must be set for
each tray.
X1 SHIFT
: Registration of the image on the paper from
side to side, as the paper lies in the tray. For
duplexing, this side is the second side (back) of the
paper.
X2 SHIFT
: Registration of the image on the paper from
side to side, as the paper lies in the tray, for the first
side (front) of a duplexed page. This item appears only
if the printer includes a built-in duplexer
(HP LaserJet 2300d printer, HP LaserJet 2300dn
printer, and HP LaserJet 2300dtn printer) and
DUPLEX
is
ON
(see
). Set the
X1 SHIFT
first.
Y SHIFT
: Registration of the image on the paper from
top to bottom as the paper lies in the tray.