HP 2300dn - Manual (Page 166)

164 Appendix C Printer memory and expansion ENWW
Printer memory
The printer comes with one dual inline memory module (DIMM) already installed in the
right-most slot position on the formatter (labeled “Boot DIMM Only”). There are two additional
DIMM slots for upgrading with:

more printer memory—DIMMs are available in 8, 16, 32, 64, and 128 MB, for a maximum of
288 MB for the HP LaserJet 2300L and HP LaserJet 2300 printers, and a maximum of
304 MB for the HP LaserJet 2300d, HP LaserJet 2300n, HP LaserJet 2300dn, and
HP LaserJet 2300dtn printers

DIMM-based accessory fonts, macros, and patterns

other DIMM-based printer languages and printer options
For ordering information, see “Ordering parts, accessories, and supplies” on page 116 .
Note Single inline memory modules (SIMMs) used in previous HP LaserJet printers are not compatible
with the printer.
You might want to add more memory to the printer if you often print complex graphics, print
PostScript (PS) documents, or use many downloaded fonts. Added memory also gives you more
flexibility in supporting job-storage features, such as quick copying.
The printer has one EIO slot for expanding the printer capability with a mass storage device,
such as an optional hard disk for storing forms and fonts, and for certain job-storage functions.
The EIO slot is also used for adding a network card or a connectivity card for serial, USB, or
AppleTalk.
To find out how much memory is installed in the printer, or to find out what is installed in the EIO
slots, print a configuration page. (See
“Configuration page” on page 72 ).