Installing an hpjetdirect eio card, Installing an hp jetdirect eio card, Installing an – HP 2300dn User Manual
Page 170
168 Appendix C Printer memory and expansion
ENWW
Installing an HP Jetdirect EIO card
1
Turn the printer off, and disconnect the power cord.
2
Open the interface cable door by pressing on the release tabs and
swinging the door outward. Disconnect all interface cables.
3
Locate the EIO slot. Firmly insert the HP Jetdirect EIO card into the
EIO slot. Twist in the retaining screws.
4
Attach the appropriate network cable to the EIO card.
5
Reconnect the interface cable(s) and the power cord. Reinstall the
interface cable door. Turn the printer on.
Note
Print a configuration page to check that the HP Jetdirect EIO card
appears as an installed option. See
“Configuration page” on page 72
. If
this page does not print in your language, see
.
When you print a configuration page, an HP Jetdirect Configuration
page that contains network configuration and status information will also
print.
1
3
4
2
5
5