HP 2300dn User Manual
Page 21
ENWW
Installing the printing system software 19
9
Select the printer name.
10 Click Add Printer.
11 Close the Print Center by clicking the close button in the upper-left corner.
Note
Some networks might not allow the printer to be set up automatically. You might need to manually
select the correct PPD when installing the printer.
Macintosh computers cannot be connected directly to the printer.
Installing Macintosh printing system software for direct
connections
This section explains how to install the printing system software for Mac OS 8.6 to 9.2.x and
Mac OS X.
The Apple LaserWriter driver must be installed to use the PostScript Printer Description (PPD)
files. Use the Apple LaserWriter 8 driver that came with your Macintosh computer.
To install the printing system software
1
Connect a USB cable between the USB port on the printer and the USB port on the
computer. Use a standard 2-meter USB cable. (See
for an
illustration.)
2
Close all software programs that are open or running.
3
Insert the printer CD-ROM into the CD-ROM drive and run the installer.
The CD-ROM menu runs automatically. If the CD-ROM menu does not run automatically,
double-click the CD-ROM icon on the desktop, and then double-click the Installer icon.
This icon is located in the Installer/<language> folder of the Starter CD-ROM (where
<language> is your language preference).
4
Follow the instructions on the computer screen.
5
Restart the computer.
6
For Mac OS X: From HD/Applications/Utilities/Print Center, start the Print Center. If the
printer does not set up automatically, do the following:
a
Click Add Printer.
b From within the printer list, select USB as the connection type.
c
Select the printer and then click Add in the lower-left corner.
For Mac OS 8.6 to 9.2.x:
a
From HD/Applications/Utilities, open the Apple Desktop Printer Utility.
b Double-click Printer (USB).
c
Next to USB Printer Selection, click Change.
d Select the printer, click Auto Setup, and then click Create.
e
On the Printing menu, click Set Default Printer.
7
Print a page from any software program to make sure that the software is correctly installed.
If installation fails, reinstall the software. If this fails, see the installation notes or Readme
files on the printer CD-ROM or the flyer that came in the printer box, or go to
for help or more information.