HP 2300dn - Manual (Page 44)

42 Chapter 2 Printing tasks ENWW
Printing on letterhead, prepunched, or preprinted paper
(single-sided)
When printing letterhead, prepunched, or preprinted paper, it is important to orient the paper
correctly. Follow the guidelines in this section for printing on one side only. For duplexing
guidelines, see
“Printing on both sides (duplexing)” on page 43 .
Tray 1 orientation: print-side up, top edge toward the printer.
Tray 2 or tray 3 orientation: print-side down, top edge toward you.
Guidelines for printing on letterhead or preprinted forms

Do not use letterhead paper that is printed with low-temperature inks, such as those used in
some types of thermography.

Do not use raised or embossed letterhead.

The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored
paper or preprinted forms use inks that are compatible with this fusing temperature (200° C
or 392° F for 0.1 second).