Cleaning the fuser – HP 2300dn User Manual
Page 81
ENWW
Cleaning the fuser 79
Cleaning the fuser
Run the printer cleaning page to keep the fuser free of toner and paper particles that can
sometimes accumulate. Accumulation of toner and particles can cause specks to appear on the
front or back side of your print jobs. (See
.)
To ensure optimum print quality, HP recommends that you use the cleaning page every time that
you replace the print cartridge or on an automatic interval that you can set up.
The cleaning procedure takes about 2.5 minutes to complete. A message (either
CREATING
CLEANING PAGE
or
CLEANING
) appears on the printer control panel display while the cleaning is
taking place.
To run the cleaning page
In order for the cleaning page to work properly, print the page on copier-grade paper (not bond,
heavy, or rough paper).
1
If your printer model includes a duplexer, open the rear output bin.
2
Press
(
S
ELECT
button) to open the menus.
3
Use
(
U
P
button) or
(
D
OWN
button) to scroll to
CONFIGURE DEVICE
, and then press
(
S
ELECT
button).
4
Use
(
U
P
button) or
(
D
OWN
button) to scroll to
PRINT QUALITY
, and then press
(
S
ELECT
button).
5
Use
(
U
P
button) or
(
D
OWN
button) to scroll to
CREATE CLEANING PAGE
, and then press
(
S
ELECT
button).
6
Follow the instructions on the cleaning page to complete the cleaning process.
7
If your printer model includes a duplexer, close the rear output bin.