HP Z600 - Manual (Page 21)

ASF 1.0/2.0 (Alert
Standard Format) Yes
TPM Integrated TPM 1.2; Infineon
Password Clear HeaderYes
CD-ROM; analog audio
cable No
AUX; analog audio in No
Clear CMOS Button Yes
Chassis Speaker
Header Yes (Integrated in Front Control Panel Cable)
ENERGY STAR®
qualified (Config
Dependent) Yes
Z600 Required Power Supply Info
Power Supply 650 watt custom power supply – (Wide Ranging Active PFC)
Operating Voltage Range 90 - 269 VAC
Rated Voltage Range 100 – 240 VAC 118 VAC
Rated Line Frequency 50-60 Hz 400 Hz
Operating Line Frequency Range 47 – 66 Hz 393 – 407 Hz
Rated Input Current 10 A @ 110-127 VAC
6 A @ 200-240 VAC
10 A @118 VAC
Heat Dissipation (Configuration and software
dependent) Typical 1578 btu/hr (397.7 kg-cal/hr)
Maximum 2705 btu/hr (681.8 kg-cal/hr)
Power Supply Fan 2x60x25 mm variable speed (sleeve-bearing)fans
Energy Star Compliant (config dependent) YES
80 PLUS® Compliant YES
FEMP Standby Power Compliant@115V (Wake-
on LAN disabled)(<2W in S5-Power Off) YES
EuP Compliant@230V (<1 W in S5-Power Off) YES
Power Consumption in sleep mode (as defined
by ENERGY STAR) - Suspend to RAM (S3)
(Instantly Available PC) measured at 115V. <9W
Built-in Selft Test LED YES
Surge Tolerant Full Ranging Power Supply
(withstands power surges up to 2000V YES
QuickSpecs
HP Z600 Workstation
System Technical Specifications
DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010 Page 21