Monthly log sheets, Troubleshooting – Horizon Fitness SXE 7.7 User Manual
Page 14
![background image](/manuals/94341/14/background.png)
BEFORE
YOU
BEGIN
2
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBL
Y
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
27
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
TROUBLESHOOTING &
MAINTENANCE
MONTHLY LOG SHEETS
.0/5)
.0/5)-:(0"-
.0/5)-:505"-4
8&&,
%*45"/$&
$"-03*&4
5*.&
.0/5)
.0/5)-:(0"-
.0/5)-:505"-4
8&&,
%*45"/$&
$"-03*&4
5*.&
.0/5)
.0/5)-:(0"-
.0/5)-:505"-4
8&&,
%*45"/$&
$"-03*&4
5*.&
Your Horizon Fitness elliptical is designed to be reliable. However, if you do experience problems with your
elliptical, please reference the troubleshooting guide listed below.
PROBLEM:
The console does not turn on.
SOLUTION:
verify the following:
• The outlet the machine is plugged into is functional. Double check that the house breaker has not tripped.
• The correct adapter is being used. Only use an adapter intended for Horizon Fitness Ellipticals.
• The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position (may not apply to all models).
• Turn off the machine and unplug power cord. Remove the console and check that all connections to the console
are secure and not damaged or pinched.
NOTE: If your console uses batteries, they may need to be replaced.
PROBLEM:
The console turns on but the Time/RPM’s do not count.
SOLUTION:
verify the following:
• Turn off machine and unplug power cord. Remove the console and check that all connections to the console are
secure and not damaged or pinched.
• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or
damaged.
PROBLEM:
The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION:
verify the following:
• The correct adapter is being used. Only use an adapter intended for Horizon Fitness Ellipticals.
• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.
PROBLEM:
The roller wheels appear to be leaving particles on the guide rails.
SOLUTION:
This is considered normal wear of the elliptical wheels.
To remove, simply wipe off the roller wheels and guide rails with a damp cloth.
PROBLEM:
The elliptical makes a squeaking or chirping noise.
SOLUTION:
verify the following:
• The elliptical is on a level surface.
• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.
TROUBLESHOOTING
SXE_7.7_Rev.1.9.indd 26-27
6/23/08 4:57:13 PM