Horizon Fitness SXE 7.7 - Manual (Page 4)

BEFORE
YOU
BEGIN

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
7
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
TOOLS INCLUDED PARTS INCLUDED
c
5mm L Wrench
c
5mm T Wrench
c
Phillips Screw Driver
c
13/17mm Flat Wrench
c
1 Console
c
1 Console Mast
c
2 Upper Handlebars
c
2 Lower Handlebars
c
2 Lower Link Arms
c
1 Top Cover
c
1 HORIZON FITNESS
12-volt Power Supply
CONSOLE
UPPER HANDLEBAR
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
ELBOW COVER
FRONT STABILIZER TUBE
FAN
GRIP PULSE
CONSOLE MAST
TOP COVER
PIVOTING FOOT PAD
WHEEL COVER
c
2 Handlebar Cover Sets
c
5 Hardware Bags
c
2 Elbow Cover Sets
c
Water Bottle Holder
c
2 Stabilizer Wheels
c
2 Middle Stabilizer Caps
HANDLEBAR COVER
If you have questions or if there are any missing parts, contact 1-800-4-MY-HOME ® .
Further contact information is located on the back cover of this manual.
For a complete exploded diagram, see Quick Start and Parts Guide (included in User’s Guide bag).
TARGETtoner ™ GRIPS
WATER BOTTLE HOLDER
STABILIZER WHEEL
PEDAL ARM
LEVELER
MID-STABILIZER
SCREWS (A)
MIDDLE RIGHT
STABILIZER CAP
RIGHT STABILIZER WHEEL
MAIN FRAME
FRONT STABILIZER TUBE
ASSEMBLY STEP 1
A) Open HARDWARE BAG FOR STEP 1.
B) Slide the RIGHT STABILIZER WHEEL into the FRONT STABILIZER TUBE and attach using 1 SCREW (A).
C) Slide the MIDDLE RIGHT STABILIZER CAP into the MID-STABILIZER and attach using 1 SCREW (A).
D) Repeat on other side.
E) Adjust the 2 REAR LEvELERS so the elliptical is level on the floor. Then adjust the
2 MIDDLE STABILIZER CAP LEvELERS so they are snug with the floor.
SCREW (A)
10 mm
Qty: 4
HARDWARE BAG FOR STEP 1 CONTENTS :
LOCK ADJUSTMENT
ADJUST HEIGHT
SXE_7.7_Rev.1.9.indd 6-7 6/23/08 4:56:16 PM