haier Space Saving 120 Volt Electric Vented Tumble Dryer HLP140E - Manual (Page 10)

Location for installation and options for various walls
1.There are 2 mounting options- either using wood slats or a whole plywood board. The dryer
installation to the wall should be able to accommodate the weight of the unit of 52 lbs. plus about
10 lbs. for clothing (or approximately 62 lbs). We suggest you use a plywood board for added
support and safety, this is the best way to mount.
2.Determine dryer position on the wall. A minimum of 6”(Inches) is needed between the top
of the dryer and the ceiling for installation.
3.If mounting the dryer above a washing machine, allow sufficient space to open the top lid of
the washer.
Wall Mounting Instructions
INSTALLATION INSTRUCTIONS
4. The Best installation is to add a plywood board to the wall studs.
As a second option- you can use two (2) slats (2 by 4 “) and attach to studs.
9