Hitachi WR9DM2 - Manual (Page 35)

English
35
9. 1/2" (12.7 mm) Square adaptor: (WR9DM2)
This is used when using a socket with square hole dimensions of 1/2" (12.7 mm).
10. Bit adaptor: (WR12DM2)
This is used for tightening small screws (M6).
NOTE: This adaptor is set only on the anvil (drive angle) of the main unit.
Fig. 41
NOTE: Specifications are subject to change without any obligaiton on the part of the
HITACHI.
Fig. 40
Code No. Dimention B Dimention S
996145 1/2" (12.7 mm) 3/8" (9.5 mm)
B
S
S
Code No. Dimention S
322752 1/2" (12.7 mm)