HONDA 2008 Odyssey - Manual (Page 450)

Every time you check inflation, you
should also examine the tires for
damage, foreign objects, and wear.
You should look for:
Bumps or bulges in the tread or
side of the tire. Replace the tire if
you find either of these conditions.
Cuts, splits, or cracks in the side
of the tire. Replace the tire if you
can see fabric or cord.
Excessive tread wear.
A tire this worn gives very little
traction on wet roads. You should
replace the tire if you can see three
or more tread wear indicators.
The compact spare tire pressure is:
For convenience, the recommended
tire sizes and cold tire pressures are
on a label on the driver’s doorjamb.
For additional information about
your tires, see page
.
Your tires have wear indicators
molded into the tread. When the
tread wears down, you will see a 1/2
inch (12.7 mm) wide band across the
tread. This shows there is less than
1/16 inch (1.6 mm) of tread left on
the tire.
490
Tire Size
Tire Size Cold Tire Pressure for
Normal Driving
Front:
Rear:
Cold Tire Pressure for
Normal Driving
Front:
Rear:
U.S. Touring model with the Michelin
PAX system
Touring model without the Michelin
PAX system
Tires
Tire Inspection
444
INDICATOR
LOCATION
MARKS
TREAD WEAR
INDICATORS
60 psi (420 kPa , 4.2 kgf/cm )
235-710R460A
104T 35 psi (240 kPa ,
2.4 kgf/cm )
33 psi (230 kPa ,
2.3 kgf/cm )
235/60R17 102T
33 psi (230 kPa ,
2.3 kgf/cm )
35 psi (240 kPa ,
2.4 kgf/cm )