HONDA 2008 Odyssey - Manual (Page 466)

The spare tire is stored behind spare
tire cover on the sidewall of the
cargo area on the driver’s side. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Remove the cover by holding the
two handles on the spare tire
cover and pulling the cover out.
If you are changing a rear tire,
close the sliding door.
Unscrew the tire mounting wing
bolt, and take the spare tire out of
its holder.
Make sure you also turn off the
sliding door main switch.
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
8.
9.
10. 12.
11.
On EX, EX-L and Touring models
Changing a Flat Tire
460
SEAT BELT
COVER
TIRE MOUNTING
WING BOLT
SPACER CONE
WHEEL NUT WRENCH
WHEEL NUTS